3D Printer Electricity Cost Calculator
Your printer
Bambu Lab’s published average while printing PLA.
For other printers, a plug-in power meter over one print gives the real average.
W
On your bill. US average ≈ $0.18 (EIA, 2026).
$
h
h
Electricity for this print
$0.09
0.53 kWh · $0.02 per printing hour
| 1 | Per hour of printing | $0.02 |
| 2 | Per 5 h print | $0.09 |
| 3 | Energy per month | 18.9 kWh |
| 4 | Per month | $3.40 |
| 5 | Per year | $40.82 |
Assumptions behind this estimate (3)
- Cost = watts ÷ 1,000 × hours × price per kWh.
- Heating the bed draws the most power at the start of a print, so short prints use a little more per hour than this average.
- Standby draw is small (about 4–16 W on Bambu Lab printers) but adds up if the printer is never switched off.
3D Printer Electricity Cost Calculator by CalciTools · free, no sign-up